Arka Aquatics Myaqua 190/380 Reverse Osmosis System; How Does Reverse Osmosis Work - ARKA myAQUA 190 Notice D'utilisation

ARKA Aquatics myAqua 190/380 Reverse Osmosis System

Thank you for purchasing our ARKA Aquatics myAqua 190/380 This offers you the ability to filter up to 99 % of pollutants,
bacteria, salts and contaminants from tap water, making it safe for use in every saltwater or freshwater aquarium
Note:
Please read the instructions carefully and keep them in a safe place
Technical data:
Osmosis water : Residual water
Operating pressure
Usable water temperature
Salt retention capacity
Membrane
Daily output of myAqua190
Daily output of myAqua380

How does reverse osmosis work?

The water pressure in the connected water pipe enables the tap water to be routed first through a fine filter (5 micron pore
size) and then a carbon filter It then passes through a special ultrafine membrane that allows only the smallest water
molecules through
Up to 99 % of larger dirt particles, pollutants, salts and bacteria are retained in one of the three filter stages to keep the
osmosis water safe and clean
The result is clean and safe osmosis water
3
2
5
7
8
Yield approx 1 : 3 – 4
3 – 8 bar
1 – 30°C
98 % – 99 %
TFM polyamide - polysulfone
Maximum 190 l / 24 h
Maximum 380 l / 24 h
(1) Fine filter
6
(2) Carbon filter
(3) Membrane
8
(4) Flushing valve
(5) Flow limiter
(6) Water inlet
(7) Osmosis water outlet
1
(8) Waste water outlet
Scope of delivery:
1× Membrane
4
1× Membrane housing
1× Fine filter cartridge
1× Carbon filter cartridge
1× Diaphragm key
1× Water connection (3/4"–1/4")
1× 3 m CCK hose
2× Wall bracket
4× Clip for fastening