Correct maintenance
IMPORTANT:
Observe the replacement intervals indicated on the individual components
The osmosis system is designed to be as low-maintenance as possible and at the same time have the longest possible
service life
• Flush the osmosis system regularly using the integrated flush valve to prevent limescale and dirt from accumulating on the
membrane This could lead to a reduction in performance or failure of the system Depending on the degree of contamina-
tion and the amount of osmosis water produced, we recommend a 5-minute rinse after each use
• After replacing the fine filter and/or carbon filter, rinse them thoroughly before connecting them to the membrane housing
• Make sure that the membrane neither dries out nor freezes
• If the unit is not in use for more than 2 weeks, please rinse it for 30–60 minutes before using it again This is also recom-
mended for shorter periods without use This is also recommended for shorter periods without use
Available accessories
Article no.
Article
FFSM
Fine filter
KFSM
Carbon filter
MB190
Membrane (for myAQUA190)
MB380
Membrane (for myAQUA380)
www.arka-biotech.de
Discover more products from our range at:
Article no.
Article
RF300
Resin filter 300 ml
RF500
Resin filter 500 ml
MF500
Multifilter 500 ml
11