Eurotops EP603 Mode D'emploi page 69

but last track or tracks recorded can be erased, space on the disc can be re-used for
other recordings. However, you should note that an audio CD created using a CD-RW
disc may not playback satisfactorily on every audio CD-player/CD-R, by contrast, may
be played satisfactorily on the majority of audio CD players. The display will show "busy
CD" and the disc is reading. Wait until reading is complete before next step.
NOTE：Make sure "NO TOC" and" CD-R"(or CD-RW)indicators lights display, or the
RECORD function will not work.
Important tips after CD encoding
Finalizing
AS has been explained earlier, in order for a disc to become a standard CD , it must
have Table of Contents (TOC)written to it. This process is known as finalizing.
3. Press FINALIZE button in stop mode.
"FiN-d" displays.
TO cancel finalizing process, press STOP button.
4. press PLAY button to start finalizing.
"--- bUSY" displays during finalize. Wait until "busy" disappears to complete the finalize.
The finalized time is subject to the contents of record, it may take few minutes in some
cases. When operation has been finished, NO TOC indicator turns off and the display
returns to the track/time display. During finalizing, no button works. Never turn the
power off nor unplug power cord. Although finalized CD-R discs may be played on
ordinary CD players, remember that finalized CD-RW disc may not play on ordinary CD
players.
Erase or Unfinalize a CD-RW
It is possible to erase last recorded track, it is also possible to erase a whole disc. Erase
procedures are possible only on an unfinalized CD-R disc. If a CD-RW disc has been
finalized, unfinalize it prior to erasure. Remember that it is not possible to perform any
Erase or unfinalized procedures on a CD-R disc.
69