Blaupunkt BikePilot2 Guide De Mise En Route Rapide page 32

2.7 Loop me!
Via the function „Trip Manager" you can call up the feature „Loop me!".
You can now plan a circuit either from your current position or from any other point
you want, such as a POI, a city or your home address.
As a next step, you can set your desired parameters. This may for example be the
desired distance or you can also restrict the duration of the circuit.
It is possible, for example, for you to enter 20 km, or correspondingly 3 hours.
LOOP ME!
24
In a next step, you are asked what activity you are performing. If you are out cycling
and you want to do a circuit, click on „Bicycle"; if you are out walking, click on
„Pedestrian".
You can now select what your circuit should look like. For example, if you would
prefer to plan a more sporty route, then click on „Hilly"; if you would prefer not to climb
too many hills, then click on „Flat". Once you have done this, you can now stipulate
what type of routes you would mainly like to travel on. For example, you can set it so
that you will be guided primarily along cycle paths.
32