Publicité
Les langues disponibles
Les langues disponibles
Crankshaft Pulley Tool for BMW N47
COMPONENTS
1
Crankshaft Holder (Part 1),
to be used as OEM 117222
2
Crankshaft Holder (Part 2),
to be used as OEM 117223
3
Crankshaft Holder (Part 3),
to be used as OEM 117221
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool set is used to hold the crankshaft pulley securely when loosening and tightening the middle
pulley fastening screw on BMW N47 diesel engines.
VEHICLE LIST
Brand
114d (F20)
116d (E81/E87/F20)
118d (E81/E82/E87/E88/F20)
BMW
120d (E81/E82/E87/E88/F20/F21)
123d (E81/E82/E87/E88)
125d (F20/F21)
218d (F22)
Also suitable for Mini and Toyota models with identical engines.
SAFETY INFORMATIONS
Keep children and other persons away from the working area.
•
•
Do not allow children to play with this tool or its packaging.
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
Be careful when working on running engines. Loose clothing, tools and other objects can be
•
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!
If you remove the ignition key before repairing, you can prevent the engine from being started
•
accidentally and resulting in engine damage.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
•
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified).
•
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Model
316d (E90/E91/F30/F31)
318d (E90/E91)
320d (E90/E91/E92/E93/F30/F31)
418d (F36)
420d (F33)
518d (F10)
520d (E60/E61/F10/F11/F07)
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9015
Engine
Codes
1.6 l D
N47D16
2.0 l D
N47D20
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicité
