Support sleeve ø 2 mm
D10041
85 Dt / Nordic Dt
Installation
Installation instructions for Tank connection 367215 (accessory)
If the fuel will be taken from a separate tank, you must install a tank connection
367215.
•
Tighten the barrel nut tightly to the fuel pump connector. Keep the parts and
the hose clean and ensure that the connection is tight, because an air leak in
the connector will stop the device from functioning.
•
Install the tank connection in the tank.
Barrel nut
Olive ø 5 mm
Protection spiral
Barrel nut
Seal
Washer
Sinter bronze fi lter
- 65 -
en
en
Vent hose
Attach the loose end of the
hose so as to not allow fuel to
spill as the boat tilts.
Screw cap
Cap seal
490539