Publicité
It is imperative the following safety and assembly instructions are followed as a safety measure.
• The weights stated in the assembly instructions must not be exceeded under any
circumstances.
• Load figures apply for evenly distributed loads and static usage.
• The surface on which the workstations are positioned must have adequate load-bearing
capacity.
• On positioning the workstations, pay attention to corridors and safety distances in relation to
machinery and installations. Corridors must not be encroached upon.
• On working at the workstations, make sure that tools and workpieces cannot fall off the
tabletop.
• On moving workstations, there must not be any objects on the tabletop, workpieces could fall
and cause accidents.
• Workstations must always be levelled such that tools and workpieces cannot fall off the
tabletop.
• During installation, it must be ensured that the components have acclimatised adequately to
the ambient temperature.
• The workstation must be secured against toppling when add-ons are being installed on the side
or on top of it.
11
Publicité
