SPIT CL 30 Manuel page 19

English
Care & Maintenance
This device is a product of superior design and manufacture and should be
treated with care. The suggestions below will help the user fulfill any
warranty obligations and also allow the user to enjoy this product for many
years.
- Keep it and all its parts and accessories out of small children's reach.
- The CL30 is built to be operated under wet conditions (IEC 529; IP 54),
however the unit should always be dried off before storage.
- Do not store it hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
- Do not store it in cold areas. When the device warms up to its normal
operating temperature, moisture can form inside where it may damage
circuit boards.
- Although CL30 is dust and dirt resistant, do not store in dusty, dirty areas
as long-term exposure to these elements may damage internal moving
parts.
- Do not attempt to open it. Non-expert handling of the device may damage
it and will void the warranty.
- Do not drop, knock, or shake it. Rough handling can break the unit or
compromise its functionality.
- Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean it. Wipe it with a soft cloth, slightly dampened in a mild soap-and
water solution.
- Keep the laser aperture windows clean by periodically wiping them with a
cotton swab dipped in isopropyl alcohol
Warranty
This warranty is void and does not apply if the product has been damaged
by accident, abuse, misuse, normal wear and tear, or if the product has
been modified, altered, or the case opened, or is repaired by unauthorized
person.
SPIT will, at its option and expense, repair or replace any products found to
be defective under the above warranty.
The only obligation and sole recourse of the buyer will be limited to this
repair or exchange. The manufacturer, the distributor or the retailer will in
no case be responsible for any incident or consequence, damage, etc.
relative to the use of those instruments.
In case of questions, please dial one of the telephone numbers listed at the
end of these operating instructions.
19