Back Label Explanation - RESTEK 22655 Manuel D'utilisation

12.0 Back Label Explanation

1. Product name.
2. Product catalog number.
3. Product serial number.
4. Warning note: This plastic case does not exhibit adequate
surface resistance properties suitable for high electric fields.
DO NOT CHARGE THIS DEVICE IN A HAZARDOUS AREA.
5. Definition of symbols—see table at right.
6. This unit conforms to EU/EMC Directive 2004/108/EC,
Standards to which Conformity is declared include
EN61326-1:2006 w/A3 Class A.
7. Unit is WEEE compliant.
8. Unit is RoHS and China RoHS2 compliant.
9. This complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
10. This Class A digital apparatus complies with Canadian ICES-003.
11. Units must be sent back to Restek Corporation for service.
12. Manufacturer company name, address, and contact information.
13. Electrical parameters.
14. ATEX coding: for definition of symbols see table to the right.
15. Passed California Energy Commission (CEC) Battery Charging
System (BCS) testing.
For the most up-to-date information, see our website
www.restek.com/leakdetector
Definition of back label symbols.
_ _ _
DC Voltage.
Ex nA EN60079-0: 2012; Electrical apparatus for explosive gas atmospheres—Part 0: General Requirements
EN60079-15: 2010; Electrical apparatus for explosive gas atmospheres—Part 15:
Electrical Apparatus With Type of Protection "n."
IIC Group II applies to areas above ground environments. Gas Group IIC relates to hydrogen and
related gas types.
T6 While testing this unit neither internal nor external elements exceed 85 °C.
X Additional information.
32 °F ≤ T
Operating range.
0 °C ≤ T
This unit is designed to detect trace amounts of hydrogen arising from a small leak in a
nonflammable environment, e.g., laboratory room air, etc.
This unit is rated for use in a nonflammable atmosphere where the sample gas may become
sufficiently high in concentration to become explosive.
13.0517 Certificate Reference.
EU Explosive Atmosphere symbol.
11 Equipment Group (non-mining).
3 Normal protection.
G Gas.
Testing according to California Code of Regulations, Title 20: Division 2, Chapter 4, Article 4,
Sections 1601-1608: Appliance Efficiency Regulations (2015) Test Specification: 10 CFR Section
430.23(aa) (Appendix Y to Subpart B of Part 430) June 20, 2016.
- 9 -
≤ 120 °F
amb
≤ 48 °C
amb
www.restek.com