Publicité
Les langues disponibles
Les langues disponibles
4.5 NETWORK Setting
This section is about NETWORK (Network or FTP) settings. Press the SETUP button
on the remote control, and then select NETWORK.
Default Network Device : Select Wired network or Wireless network.
Wired IP Setting: Default setting is DHCP. If you cannot access via LAN with DHCP
setting, use the Static IP setting.
Wi-Fi IP Setting: Default setting is DHCP. If you cannot access via LAN with DHCP
setting, use the Static IP setting.
Search Wi-Fi Network: Connect the USB module to TVX-HD after connecting the
AP Router to a PC. Select "Search Wi-Fi Network" to search for your AP or AP
router. Spend some time searching for it, and you will see the AP LIST popup
menu. Select the AP that you want to connect to.
Setup Network Disk: This function searches and helps you find PCs connected to
the network.
SAMBA: If you have a guest account, shared folder names can be listed and can
be selected.
NFS: Connected PCs are listed automatically in NFS of NAS storage or Netshare.
TVX-HD Network Info: You can see the information of TVX-HD's Network.
FTP Password: to use FTP function, you must use the ID & password displayed on
the Network Menu within SETUP. The FTP ID is tvixftp. you can use capital
letters only for the password.
It allows you to connect to network
easily with uPnP suppor t, and it
does not require an IP address. You
can immediately playback uPnP
connected files on wired/wireless
network environment.
With NFS, TVX-HD can play high bit-
rate files from a PC flawlessly over a
LAN. We recommend NFS connection
over SAMBA. You need to install the
TVX-HD Netshare program (or other
NFS server) on the server PC, but
the settings are much easier than in
SAMBA mode.
0
English
Publicité
