TViX M-6600 Serie Guide Rapide page 14

English
3.6 Initial Setting
① Connect the TVX-HD to your TV using A/V cables, and turn on the TVX-HD. You
will see the following screens when you turn the unit on for the first time or when
you select "Load Default Setting".
② When you see the initial page on your TV screen shown in the picture below, press
the "OK" button on the remote controller.
- In case of HDMI connection: TVX-HD does not show this page but sets to the best
resolution automatically and leads you to the next stage, "Language setting".
- In case of other connections: TVX-HD changes screen resolutions between NTSC,
PAL, 480P, and 576P about every three seconds until the "OK" button is pressed, so
press the "OK" button when you can see a clear screen
③ Select your language.
④ Now you can see the TVX-HD main page.