Akai AR-180 Notice D'emploi page 9

P9
SLEEP TIMER OPERATION
1. This clock radio is equipped with a 'sleep time' function which will
switch off the radio automatically after a pre-selected period from 59
to 01 minute.
2. Press SLEEP BUTTON, the display will show 0:59 sleep time. At the
same time radio will come on and stay for 59 minutes.
3. To shorter the 'SLEEP' time, press SLEEP BUTTON together with
the minute button until the desired 'sleep' time is shown on display.
4. After pre-selected 'sleep' time has elapsed, the radio will switch off
automatically. To switch if off before the pre-selected 'sleep' time
has elapsed, press SNOOZE BUTTON.
SLEEP TO RADIO AND WAKE TO RADIO
1. Set the desired alarm time as described in 'SETTING THE ALARM
TIME' and set ON/OFF/AUTO FUNCTION SWITCH to 'AUTO'
position.
2. Set sleep time as described in SLEEP TIMER OPERATION.
3. The radio will switch off after the 'sleep' time has elapsed and
radio alarm will switch on next day.
SLEEP TO RADIO AND WAKE TO BUZZER
Set as described in SLEEP TO RADIO AND WAKE TO RADIO. Set
the ON/OFF/AUTO FUNCTION SWITCH to 'AUTO' position. Slide the
volume control to minimum in BUZZ position.
DIMMER CONTROL
The dimmer switch (9) allows you to set the brightness of the LED
display to HIGH or LOW.
TECHNICAL SPECIFICATIONS
Frequency range : AM 530 – 1600 kHz
Battery backup :
Power source :
All manuals and user guides at all-guides.com
FM 88 – 108 MHz
9V battery (for clock)
AC 230V ~ 50Hz, 5 watt