Akai AR-180 Notice D'emploi page 8

P8
POWER CONNECTION
Plug the AC Power cord to the household outlet. Make sure the voltage
is correct for safety purpose and prevent plausible damages to the set.
Connect one 9V battery (not included) to the battery terminals in the
battery compartment. It maintains the clock continue function whenever
the AC power is interrupted.
Please note : the display will not exhibit time during power failure but
the clock will keep correct time.
RADIO OPERATION
1. Set the On/off/Auto function switch to ON position.
2. Set the Band selection switch to desired waveband.
3. Tune to the desired station with TUNING CONTROL.
4. Adjust the volume level with VOLUME CONTROL.
5. To obtain better FM reception, lay out the FM antenna wire to it's
full extent.
6. The radio can be switched off by setting On/Off/Auto function switch
to the 'OFF' position.
SETTING THE CLOCK TO THE TIME OF DAY
1. Press the TIME SET BUTTON at the same time together with HOUR
SET BUTTON for hour setting or MINUTE SET BUTTON for minute
setting.
2. Select the type of alarm (RADIO or BUZZER) and slide the ON/OFF/
AUTO function switch to the AUTO position.
RADIO : Wake to radio, the radio must be tuned to a station which will
be broadcasting at the alarm time and the volume adjusted to
the desired level.
ALARM : To wake-up with Buzzer, slide volume control to minimum in
BUZZ position.
INTERRUPTING THE ALARM (SNOOZE FUNCTION)
The alarm can be interrupted for 9 minutes by pressing SNOOZE
BUTTON after which time the radio or the alarm will come on again.
TO SHUT ALARM OFF
To shut off the alarm, press the ALARM OFF button once and alarm
time will be reset for the next day. Slide the ON/OFF/AUTO switch to
the OFF position to turn off alarm and not set it for the next day.
All manuals and user guides at all-guides.com