Publicité
Les langues disponibles
Les langues disponibles
- System Information
Select icon "system information"
, press "confirmation" button
to check system
information and capacity remaining.
- Code-matching setting
, keep pressing "monitor button" for 5 seconds. Select the outdoor
Enter into system setting
station that you want to connect. During connection, shortcircuit "code-matching"
on the back of
outdoor station. After it shows "OK",press "exit" button
to quit, code-matching succeed.
- Restore Factory Setting
Select icon "restore factory setting"
, press "confirmation" button
to select "Yes" or "No."
7. Operation Instruction
1. when a visitor presses the button on the outdoor camera, indoor monitor will take photos or
record a video automatically (photo capacity and video time can be set with a TF card inside), and
it'll ring with a euphonic melody. Ring volume can be adjustable by pressing volume button "
".
Under standby condition, user can press button "
" to monitor outside, button "
" to talk
2
.
with the visitor and button "
" to open the door. Conversation within 40 seconds can be
terminated by pressing button "
" again.
3. During monitoring, user can press volume button "
" to take photos. Keep pressing monitor
button "
" for 3 seconds to record video for a long time, and keep pressing this button to quit
Publicité
