ZOSI Z18.5.T.1 Mode D'emploi page 4

Mounting the Camera
The camera can be mounted onto a fl at, vertical surface using screws. The surface must have
suffi cient strength to hold the camera. Materials such as hardwood, brick or masonry are good
options. You can mount the camera onto a metal surface, but you'll need to supply your own
mounting hardware.
Position the Cables
1.When setting your cable, try to avoid
winding it on objects with sharp angles.
2. Don't put your cable close to live
electrical wiring. AC electricity will
generate radio "noise", which can
interfere with camera's signal.
3. All wiring and connectors must be
insulated in suitably. Meanwhile, they
also should be protected from moisture
and sunlight because they are not of
weather resistant.
Please note, model shown is for illustration
purposes only.
Camera
Lens
3
Video
Connector
Power
Connector
Infra-red
LEDs
OSD
Button