ZOSI Z18.5.T.1 Mode D'emploi page 3

Choosing a Location for this Camera
To get optimal effect from camera, where you install cameras is pivotal. You should consider the
distance between the camera and its subject to ensure you obtain a good view of the areas in
focus. Also think about the appropriate mounting places (e.g., under the eaves of a roof is a good
choice) where it won't be either an easy target for vandals or affected by constant light reflections of
moving vehicles (which can cause falsely triggered motion detection). There are numerous factors
you should consider when choosing a location to mount your camera, not merely where you want to
monitor it.
To mount the camera
Place the camera in the location where you want to mount it, and mark screw holes on its surface to
fix the screws. Then, using proper screws for the surface where you prepare to fix the camera. Screw
the camera stably into the place.
If you're going to mount camera on a wooden surface, then screw the camera directly to the surface.
If you're going to mount camera on a masonry surface (bricks, concrete or similar) , then you'll need
to use the included wall plugs.
2