Vasner Lumbeat Mode D'emploi page 10

ACTUAL RECOM-
Status MENDED
Status
Bluetooth Couple
active device
Lamp on Switch
or off lamp on
or off
Lamp on Activate
dimmer
Lamp on Change
light mode
Commissioning:
1. Adjusting:
Position the light somewhere where it can sit securely
and upright.
2. Power pack power supply:
Insert the little round plug for the power pack into the
charger socket marked DC 5V on the back. Then plug
the power pack itself into a 220 V outlet. A red status
LED on the back indicates that the device now has
power. The lamp is ready to use immediately.
Which What Confirma-
button? to do?
Play/ Hold down Status
Pause button for tone + LED
longer flashes
quickly
ON/OFF Press button
briefly
ON/OFF Hold down
button for
longer
M Press button
briefly
3. Switching on/off:
tion To switch the lamp on or off, touch the ON/OFF button
with the round light symbol.
4. Colour climate:
When the lamp is switched on, you can adjust the
lighting atmosphere by touching the "M" button. The
most recent setting is always saved.
Light modes: Neutral/Cold/Warm.
5. Dimmer function:
By pressing and holding the ON/OFF switch, you
have the option to adjust the brightness of the lamp
to make it dimmer or brighter. Simply let go of the
button once you have achieved the required level of
brightness.
6. Cable audio input:
The Lumbeat offers two ways to play music via the
sound system using either a 3.5 mm jack cable or Blue-
tooth in conjunction with a compatible device such
as a mobile phone or MP3 player. To use this cable,
simply plug one end into the headphone jack on your
mobile device and the other into the "AUX IN" socket.
7. Bluetooth audio input:
To connect your mobile device to the sound system
via Bluetooth, proceed as follows: