Publicité
Les langues disponibles
Les langues disponibles
VANITY INSTALLATION INSTRUCTIONS
6. To adjust the doors forward or backward, change
keyhole slot position as in (a).
To adjust the doors right or left, loosen/tighten the
screws as in (b).
To adjust the doors up or down, adjust bracket
height as in (c).
MIRROR INSTALLATION INSTRUCTIONS
1. Decide on the location for mirror (E) and mark the
wall accordingly. The metal anchors (AA) do not
require a pilot hole, but make sure they are level
and spaced the same distance as the mounting
hangers preassembled on mirror (E) and are
located at the desired height.
Using a Phillips screwdriver (not included), screw
the metal anchors (AA) flush into the wall.
CAUTION: Do not overtighten the metal anchors
(BB).
Hardware Used
Metal Anchor
AA
2. Using a Phillips screwdriver, turn screws (BB)
into metal anchors (AA). Leave screws (BB)
out 3/8 in. from wall to leave enough room for
the screw heads to rest in the slots of the
mounting hangers on mirror (E).
Hardware Used
Screw
BB
6
a
1
x 2
1 2
x 2
7
b
AA
AA
BB
c
A
Publicité
