Recover Mode - Super Ego SEGO SCL Instructions D'utilisation

4. The scale will now start charge the entered amount of refrigerant. The scale´s buzzer will alarm when charging
nearly finish (refrigerant≤0.05kg).
5. When the number displayed as the same as the previously enteres charge weight, the charge is completed,
stop the charge system manually. LCD displays the left amount refrigerant (like the screen below). Press the
"Enter" key exit to screen.
!
Caution
If you press a wrong key during charge mode, press "ENTER" key to cancel the previous operation, then press
"CHARGE" key, the previous screen will appear.

5.6 Recover Mode

The scale is not only a stand-alone but also can be compared with a recovery/recycle machine component of a
system.
1. Turn the scale on.
2. Place refrigerant tank on scale. Wait for reading to settle out.
For example: The refrigerant tank is 20kg, the following screen will appear:
OPERATION
ENGLISH 15