Battery Charging - patura P 35 Solar Mode D'emploi

7. Press until the display shows the new code number required.
8. Press three times to save the new security code.
The display returns to normal, with the padlock pointer on, indicating the security code feature
is enabled.
Disabling the security code feature
1. Press and hold
2. Press repeatedly until your security code appears on the display.
3. Press briefly to unlock and turn on the energiser.
4. Press and
5. Press until the display shows your current security code.
6. Press briefly. The display shows zero
7. Press three times.
The display returns to normal with the padlock pointer off, indicating the security code feature
is disabled. A security code will not be required when the energiser is switched on.

Battery charging

The solar panel can fully charge a flat battery in two weeks, provided the energiser is switched
off and there is adequate sunlight. The battery can also be charged for 12 – 24 hours with a
current not exceeding 1A using a suitable 12 V battery charger.
When fully charged, the battery should be able to power the energiser for 2 weeks (P50) up to
3 weeks (P35) with no sunlight.
Warning! The battery must be disconnected and removed from the energiser before connecting
it to a battery charger.
Energiser maintenance
Clean the solar panel regularly with a soft cloth using glass cleaner or a mild solution of deter­
gent and water. This will ensure the solar panel functions efficiently. When transporting the
energiser, protect the solar panel to prevent the glass surface from being smashed.
until the display turns on and shows two question marks
together until the display shows .
.
- 40 -
.