Vonyx ST016 Manuel D'instructions page 7

UHF MICROPHONE
1. Power ON/OFF
Press to turn the microphone on/off.
2. Pair
Press to initiate pairing.
Set up: Unscrew the bottom end cover to expose the battery compartment and
pairing button. Make sure the correct batteries are installed accordingly before
proceeding.
One to one pairing:
With microphone in the OFF state: press the PAIR button (2). Press the POWER
button (1) until the display flashes, meaning the matching code mode has been
entered. Turn on the PA amplifier power; the main receiver inside the PA
amplifier will automatically match the code.
One to any pairing:
With microphone in the OFF state: press the PAIR button (2). Press the POWER
button (1) until the display flashes, meaning the matching code mode has been
entered. Turn on the PA amplifiers power; the main receiver inside the PA
amplifiers will automatically match the code.
BT CONNECTION
1. Turn on the main PA amplifiers' power. In default, BT is switched off. Press the ON/OFF MP3/FM/BT
button 3 times to turn on the BT function.
2. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device. If the match is successful, a tone will be
transmitted.
Attention: The BT distance is approx. 10 meter without any barrier.
TROUBLE SHOOTING
PROBLEM
The power indicator is dim
Hash Howl
Noise
UHF
No license required
BE DK F
HU IT NL
PT RO SI
CH GB
Belgium (BE), Denmark (DK), France (F), Finland (FI), Germany (DE), Hungary (HU), Italy (IT), Netherlands (NL), Norway (NO),
Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), Great Britain (GB)
POSSIBLE SOLUTIONS
It indicates the battery is low, please change to AC supply and
charge it immediately;
1. Turn down the volume of amplifier
2. Turn the tone control to Bass
3. Adjust the distant between amplifier and microphone, do not
face the speaker of amplifier while using it
1. Battery low of the amplifier or transmitter;
2. The microphone cord might be damaged;
3. Interference by same frequency.
(excluding geographical restrictions)
FI DE
NO PL
ES SE
7