Features; Assembly - Hart HLHT01 Manuel D'utilisation

Poignée rotative taille-haies
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FEATURES

PRODUCT SPECIFICATIONS
Motor ..................................................................... 40 V DC
Blade Length ..............................................................24 in.
KNOW YOUR HEDGE TRIMMER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
GUARD
The guard helps to deflect chips or other debris away from
the operator's hands.

ASSEMBLY

UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if it is not completely assem-
bled or if any parts appear to be missing or damaged.
Use of a product that is not properly and completely
assembled could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
PACKING LIST
Hedge Trimmer
Scabbard
Operator's Manual
Cutting Capacity...........................................................1 in.
Cutting Speed ............................................3,200 cuts/min.
ROTATING REAR HANDLE
The rear handle can be rotated to lock at either side in 45°
or 90° angles for ease of use when trimming. This is useful
when trimming vertically or along the sides of shrubbery.
SCABBARD
The scabbard keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also
helps keep the blades from being nicked or damaged when
the tool is in storage.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
6 – English

Publicité

Table des Matières
loading

Table des Matières