Standard Wiring Options - Eaton PH1 Manuel Technique

Alarm pull station - PH1
English

4.0 Standard wiring options

See below for the standard wiring options for the PH1. If a different wiring layout has been specified when ordering the
unit, please see the separate diagram supplied with the unit.
EOL resistors should only be fitted to the last unit in a system.
Standard wiring – switch only
Standard wiring – c/w EOL resistor
R1 – EOL resistor
Standard wiring – c/w series resistor or series & EOL resistors
R1 – Series resistor
R2 – EOL resistor (if fitted)
2
AlArm pull stAtion - pH1 TM230 Issue F July 2019 www.eaton.com