AEG SRC 4438 Mode D'emploi page 44

ENGLISH
44
Set Alarm on the Device
If not using the "iDock Speaker" App in your iPod touch or
iPhone the alarm time must be set manually on the device.
You can set two alarm times; proceed as follows:
• Press and hold the ALARM button (10). The display
shows the currently set first alarm time. The display
shows " ". The hours flash.
NOTE:
Press the ALARM button again to set the second alarm
time. The display shows " ". The hours start flashing.
• Press the SET-/ SET+ buttons to set the hours.
Press the /ENTER button to confirm. The minutes
flash.
• Set the minutes, press the
Press the /ENTER button to confirm.
• Using the SET-/ SET+ buttons, select how you
want to be woken. Confirm your selection with the
/ENTER button.
The following options are available:
- "BUZ" (Buzzer):
An alarm sounds when the wake-up time is
reached.
- "FM" (Radio):
As soon as your set wake-up time is reached, the
radio switches on. The last set channel will play. The
volume increases slowly.
- "IP":
CAUTION:
Before plugging in the iPod/iPhone, make sure
that the radio is not in iPod mode.
• Insert the adaptor supplied for your iPod touch/
iPhone in the dock (14). You can only ensure
that the iPod fits correctly into the iPod/iPhone
port if the adapter is plugged in.
• Insert your iPod touch or iPhone in the dock (14).
CAUTION:
Make sure that your iPod/iPhone is plugged up-
right into the port. Do not bend or tilt the iPod/
iPhone whilst it is plugged into the port. This may
lead to the port/iPod/iPhone being damaged.
• Playback from your iPod/iPhone starts in the
set mode at the set alarm time. The volume
increases slowly.
NOTE:
• Follow your iPod/iPhone manual to select the
desired mode.
• If no iPod/iPhone is connected the device
wakes you in BUZZER mode.
SET-/ SET+ buttons.
• Press the ALARM button once or twice, the indicators
" " or " " appears on the display. The first or second
wake-up time is active.
• Switch the unit onto Standby Mode using the
/ALARM RESET button (4).
NOTE:
• With docked iPod touch/iPhone and activated App
setting the alarm-function can only be used in iPod
mode.
• Previous alarm times which have been set manually
are overwritten with the iPod/iPhone data if iPod/
iPhone with activated App is docked.
Turn Off Alarm
Press the /ALARM RESET button to turn off the alarm
until the next day.
Snooze Function
Press the SNOOZE/DIMMER button (3) to deactivate the
alarm for approx.10 minutes. The " " and " " icons
respectively start flashing on the display.
Deactivate Alarm
To deactivate the alarm time repeatedly press the ALARM
button (6) until the display (Fig. 2/9) disappears.
Sleep Timer (SLEEP button (12))
During ON mode you can set the automatic sleep timer
in 00-minute steps between 90 and 10 minutes; after this
period of time the device turns into standby mode. Press
and hold the button for approx. 3 seconds. The display
shows " " and "00" starts flashing. Press the
SET+ buttons (9) until the desired snooze time is dis-
played. Press the /ENTER button (8) to confirm. "
is displayed if the function is activated. After the set time
the device automatically turns off.
Press the /ALARM RESET button (4) to deactivate this
function again.
Music Playback from iPod/iPhone
(iPod/iPhone not supplied)
CAUTION:
Before plugging in the iPod/iPhone, make sure that the
radio is not in iPod mode.
1. Insert the adaptor supplied for your iPod touch/iPhone
in the dock (14). You can only ensure that the iPod fits
correctly into the iPod/iPhone port if the adapter is
plugged in.
2. Connect your iPod/iPhone to the iPod dock (14).
SET-/
"