Télécharger Imprimer la page

Pro-Lift W-1005 Instructions D'utilisation Et Manuel De Pièces page 3

Publicité

Les langues disponibles

Les langues disponibles

WARNING: RISK OF BURSTING - Do not exceed
!
rated pressure of 125 psi. Fill only from low pressure
compressor systems whose pressure is no greater
than 150 psi. Do not adjust or tamper with factory
preset pressure relief valve. Do not operate air tank
with damaged or missing parts. Do not attempt to
weld or repair a damaged tank. Replace tank if it is
dented, cracked, rusted or otherwise damaged in
any way. Never use past the discard date stamped
into the bottom of the tank. Store indoors, do not
expose to moisture and or direct sunlight.
WARNING: RISK OF FIRE OR EXPLOSION - Do
!
not use to store or disperse combustible/fl ammable
liquids, gasses or materials of any kind. Fill only
with fi ltered, preferably dried air.
WARNING: No alterations shall be made to this
!
device. Only attachments and/or adapters supplied
by the manufacturer shall be used.
OPERATION
Filling Air Tank: (ref. Fig 1)
1. Fill the air tank by connecting an air source to the air
tank manifold. Monitor air pressure gauge movement.
Do not exceed rated air pressure of 125 psi.
2. Open the air valve by turning the red knob counter-
clockwise pressurizing the air hose. Your air tank is
now ready for use.
MAINTENANCE
Periodically inspect the air tank. Ensure that all parts
move freely. Inspect the air hose for cracking and abra-
sions.
Cleaning
Inspect the air tank for signs of rust or corrosion. Clean
as needed and wipe with a dry cloth.
Storage
When not in use, shut off the air valve by turning the red
knob clockwise. Store indoors, do not expose to moisture
or heat radiation.
REPLACEMENT PARTS
Not all components of the air tank are replacement items,
but are illustrated as a convenient reference of location.
When ordering parts, give model number, part number
and description below. Call or write for current pricing:
phone (816) 891-6390, fax (816) 891-6599 or contact
Customer Support. 10939 N. Pomona Ave., Kansas
City, MO 64153.
Part No.
W-4526
Manifold
W-4527
Air Hose
W-4528
Pressure Gauge
-
Labels
-
Owner's Manual
Manifold
Figure 2 - Air Tank Replacement Parts
3
Description
Pressure
Gauge
Air Hose
Qty
1
1
1
1
1

Publicité

loading

Produits Connexes pour Pro-Lift W-1005

Ce manuel est également adapté pour:

W-1010a