English
Fan Heater
FACTOR CONNECT
DESCRIPTION
A
Control panel
B
Air outlet
C
Carry handle
D
Display
1
On/Off
2
Funtion and power selector
3
Timer
4
ECO mode
5
Silent mode
6
WIFI configuration
7
Adjustable thermostat / timer button
USE AND CARE:
- Fully extend the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to carry it or move
it.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains
when it is not in use, even if it is only for a short
period of time, as proximity to water involves a
risk, even if the appliance is disconnected.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or persons with reduced physical, sensory
or mental abilities or lack of experience and
knowledge.
- Do not store the appliance if it is still hot.
- Do not store the appliance on areas where the
temperature could be lower than 2ºC.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance unattended while in
use.
- Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
- Do not use the appliance to dry pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- CAUTION: User can't sleep when appliance is
under use; there is a risk of injuries.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Some parts of the appliance have been
lightly greased. Consequently, the first time
the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
- To eliminate the smell given off by the appliance
when used for the first time, it is recommended
to have it on at full power for 2 hours in a well-
ventilated room.
WIFI CONNECTION & DOWNOADING THE
APP:
- To be able to use the fan heater Factor Connect
from anywhere, the Taurus App has to be
downoalded.
SET UP:
- Download the Taurus App form the App Store or
Google Play.
- Sign up using your email address and
password.
- Confirm the registration using the verification
code that will be sent to your email account.
- Create your home, name it, establish the
geographical location and select the room
where you are going to place this smart
appliance.
- Add Factor Connect by following the steps
described in THE QUICK GUIDE.
LUMINOUS WIFI INDICATOR
- To connect Factor Connect to the Wi-Fi, press
the wifi button (6) until the wifi pilot light flashes
rapidly.