KIKKA BOO WARMY Mode D'emploi page 5

Remark:
• The milk or food will get cool after the heat up. Please use the milk or food immediately.
• Always check the food temperature by testing some on the back of your hand before feeding.
III. Sterilize
1. Add 50ml pure water in the product, put the basket in the product.
2. Put the milk bottle in the basket, use the cup to cover the bottle.
3. Plug in, press the on button. The indicated light will be on.
4. When the water is nished, the product stop working automatically.
5. Take out the milk bottle with the clip to avoid scalding injury.
6. If want to stop the product in the working process, press the o button.
Remark:
• Risk of burning! Wait 30 seconds before you open the cover and remove the bottles.
• The sterilized bottle is suggested to used within 3 hours.
IV. HEATING LEVEL GUIDE:
The speed at which the warmer heats the milk or food depends on the quantity and the initial temperature of the milk or food (e.g. out
of fridge 5 ºC or room temperature 17 ºC). The following guidelines give the approximate temperature can reach with the water added
the container.
GUIDELINES FOR SETTING APPROXIMATE TEMPERATURE OF MILK WITH DIFFERENT WATER VOLUME:
1.Fast warm milk /Milk temperature 5 C; 2.Fast warm milk /Milk temperature17 C; 3. Milk (ml); 4. Initial temp C;
5. Water (ml); 6. Water temp C; 7. Time; 8. Final milk temp C;
V. USAGE STEP FOR MAKING JUICE
1. Put the juicer on the juicer container.
2. Divided the fuit into two semi for making juice. Squeeze.
3. No need t oconnect the power.
ADVANTAGES OVER MICROWAVE:
This warmer will warm up milk / food without destroying the nutrients found in the milk / food, unlike microwave oven.
CLEANING:
1. Turn o the power supply before cleaning.
2. Clean the base and main body with a soft cloth or sponge, and then dry it with clean cloth or the napkin. Do not clean it using
water.
3. Do not immerse the bottle warmer in water when cleaning
MAINTENANCE:
It may be an advantage to descale the heating plate to maintain its e ciency by removing lime scale.
1. To reduce lime scale build up, use pre-boiled or ltered water in the product. Descale the heating plate by pouring 20ml of vinegar
mixed with 40ml of cold water into the product, leave inside the unit until any lime scale has dissolved. Empty the unit thoroughly.
2. Use the dilute Acetate(1:2) to clean the heating plate of the product .Put the dilute acetate into the product ,connected the power
then press the on button for work about 20-30 minutes. Drain out the dilute acetate, then put the pure water into the product, cycle
work twice, after that can maintain the products.
ENGLISH