Easypix WDV 5270 Manuel D'utilisation page 25

Press the T or W button to zoom in or zoom out the subject. The value of
magnification level appears on the LCD monitor.
3: Press the SHUTTER button to start recording.
4: Press the SHUTTER again to end the recording. If the memory is full the
video camera will stop recording automatically.
Taking still images
1. Set the camcorder to capture mode, the icon
LCD screen.
2. Zooming:
Press the T or W button to zoom in or zoom out the screen. The
zoom bar appears on the LCD monitor.
3. Hold the camcorder steady and then press the SHUTTER button down
to take a picture.
7
appears on the