Publicité
P O R T E R O
2
Place the panel rings onto the fixing
pins that have been taken out. Put the
pins that have not been used
completely into their grooves.
4
Separate the trim at the top and
bottom, by loosening the clamping
screws.
E L E C T R Ó N I C O
-
D O O R
5
Once it has been connected up, close
the panel, press it against the flush-
mounted box and fix it to this using
the clamping screws.
E N T R Y
S Y S T E M S
-
3
Lever up the lid on the nameplate and
put the label that identifies each push
button on it.
6
P O R T I E R
É L E C T R O N I Q U E
Adjust the trim at the top and bottom.
Publicité
