Klarfit 10031106 Mode D'emploi page 11

Problem Possible Cause
Can not work. No power.
The function keys
can't open.
Sudden stop The power off .
while operating.
Massaging time
is more than 15
Minutes.
Continuous
working too long,
overheating.
Force is too large,
massage ball
blocked.
According to the European waste regulation 2012/19/EU this symbol
on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be taken to the ap-
propriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information about recycling
of this product, please contact your local council or your household was-
te disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2011/65/EU (RoHS)
Troubleshooting
Hints on Disposal
Declaration of Conformity
Solution
Access to the power supply and check wheter
the power supply is good.
Press the ON/OFF (Power) button.
Check the power interface is connected well
or not.
Re-start the ON/OFF button.
Re-start the switch button (Power) after
cooling down.
Relax your feet soles when massaging.
11