BEHA PB Manuel page 51

USE OF THE APP
Press the Connecting (1) button on
the heater for 3 seconds until the
blue light blinks one time, then
1
release the button.
After a few second the heater is
added to the app. Press "Beha
heater" and you will enter the
programming part of the app.
2
TEMPERATURE
Same temperature 24
hrs.: Press "SAVE
CHANGES" when the
wanted temperature is
selected. The black
triangle above the
temperature scale will
show measured
temperature in the room.
> If a heater is linked to a programme and you want to use a different temperature setting for a period of time,
tap on TEMPERATURE. Then set the wanted temperature and tap on STORE CHANGES.
> Heaters can be deleted when you are in PROGRAMME or TEMPERATURE. Tap on DUSTBIN then
select the wanted temperature manually with the thermostat wheel on the heater.
PROGRAMME
Select the wanted
temperature for the
specific hours
throughout the 24 hrs.
period for each day of
the week. Press SAVE
CHANGES. The
programme starts at
00:00, this cannot be
changed.
You have two choices:
> TEMPERATURE
> PROGRAMME
Press "Heater name" to change
name to e.g. "Office 800W".
Press "SAVE CHANGES".
The opening page is
showing heaters that
are connected to the
app. Heaters within
range of the
phone/tablet will be
shown in black, heaters
outside of the
Bluetooth range will be
shown in grey.
51
GB
DELETE
HEATER FROM
THE APP
Press on the name
of the heater and
slide to the left.
Tap on
CONFIRM.