Dion K26898 Instructions D'installation page 7

Instructions d'installation/ Installation instructions : F6113T950
Ensemble ameneur hydraulique K26898 et K26971
Hydraulic lift kit K26898 & K26971
Step 1: Support bracket

Remove the cob saver and insert the bracket for the hydraulic kit.
o Picture on left is F61/F63 (4 row header)
o Picture on right is F64 (3 row header)
Step 2: Spinner installation

Set in position the spinner assembly using the ½" x 1-3/4" bolts, lock washers and lower
and 5/16" bolt in the lower holes. Do not tighten the bolt.

Align the motor and spinner connector sprockets, then tighten the bolts.

Place a protective cardboard or sheet to prevent scratching the paint.
Step 3: Set the lower shoe
22 janvier 2013
Installation instructions