Publicité
Les langues disponibles
Les langues disponibles
syncing Rf signal between HT 300Rf and HTs 1900G
1 .
Hold sync switch
•
Unit will beep ONCE or TWICE after the 1 second ignore
•
Unit will beep THREE TIMES after 5 seconds
2 .
Release switch right after the sound is made, the unit will beep once every 0 .5 seconds to indicate that
it's in learning mode
3 .
Press "Program" switch on the HT 300RF
•
Both the HT 300RF and the HTS 1900G will beep TWICE, signaling that the HTS 1900G has learned RF code .
noTe: The HTS 1900G will stay in learning mode for 10 seconds . If no RF signal is received within 10 seconds,
learning mode will expire and you will need to press syncing switch again to restart learning mode . Please ensure that
the RF remote is 6 inches away from the main unit during syncing .
22
PRoGRaMMInG THe HT 300 Rf To
ConTRol MonsTeR GReenPoWeR
(CONT)
oUTleTs
™
Publicité
