Uniteck UNIFIX 1C 30 Manuel D'installation page 9

Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
The Unifx 1C 30 mounting bracket has been designed to be used on a flat surface (ex.: campervan
roof, houseboat).
SAFETY INSTRUCTIONS
• Take the appropriate mesures to prevent accidents during your mounting steps.
• If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
• When finished, check and ensure that all of your brackets and panels are fixed properly.
UNIFIX - COMPOSITION
I
Provided elements
x4
X4
Low wedge
For the mounting, make sure you have a slightly wet cloth.
For the preparation of the surface before gluing the brackets: only use a wet cloth and the
degreaser provided. Do not use alcohol/white spirit...
Respect 24 hours of drying time. Do not move or manipulate during this time.
Sika flex must be applied at a temperature between 5°C and 35°C, the optimum application
temperature being between 15°C and 25°C.
x4
X4
Blocking wedge
www.uniteck.fr
D5 D5
x12 x12
x1
Glue
M5
x12
X1
Degreaser
EN
9/22