▶
tRAS
Determnes the tme RAS (row address strobe) takes to read from and wrte to
memory cell.
▶
tRFC
Ths settng determnes the tme RFC takes to read from and wrte to a memory
cell.
▶
tWR
Determnes mnmum tme nterval between end of wrte data burst and the start of a
pre-charge command. Allows sense amplfiers to restore data to cell.
▶
tWTR
Determnes mnmum tme nterval between the end of wrte data burst and the start
of a column-read command; allows I/O gatng to overdrve sense amplfiers before
read command starts.
▶
tRRD
Specfies the actve-to-actve delay of dfferent banks.
▶
tRTP
Tme nterval between a read and a precharge command.
▶
tFAW
Ths tem s used to set the tFAW (four actvate wndow delay) tmng.
▶
tWCL
Ths tem s used to set the tWCL (Wrte CAS Latency) tmng.
▶
tCKE
Ths tem s used to set the Pulse Wdth for DRAM module.
▶
tRTL
Ths tem s used to set Round Trp Latency settngs.
▶
Advanced Channel 1/ 2 Tmng Configuraton
Press <Enter> to enter the sub-menu. And you can set the advanced memory tmng
for each channel.
▶
GT OverClockng
Ths tem allows you to enable/ dsable the overclockng of ntegrated graphcs.
▶
GT Rato
Ths settng controls the rato of ntegrated graphcs frequency to enable the ntegrated
graphcs to run at dfferent frequency combnatons.
▶
Adjusted GT Frequency
It shows the adjusted ntegrated graphcs frequency. Read-only.
En-31