ORTEA NEXT ICAR Mode D'emploi page 6

ICAR by ORTEA NEXT
RPC 8BGA Regulator
Front description
Parameters set-up
At the first power up of the automatic power factor correction equipment, carry out the following operations:
a) Enter date and time. The power factor regulator shows the page:
In this page, increase or decrease the numerical values with the  keys. Use the  keys to move
from one number to the other. Confirm with the  key.
b) Enter the desired language. The power factor regulator shows the page:
Confirm with the  key to switch to the LANGUAGE page.
In this page, select the language with the  keys and confirm with the  key.
c) Enter the external CT primary value. The power factor regulator shows the page:
Confirm with the  key to switch to the CT PRIMARY page.
In this page, select the CT primary value with the  keys and confirm with the  key.
For any further modifications of the CT primary value, select the SETUP menu, then the M02 GENERAL
menu. Select the parameter P02.01 CT primary value. Repeat the above operations.
Navigation keys
Confirmation key
Alarm LED
Optical port for WIFI e USB connection
6 / 16
ALL65 mar19


