Prior To First Use; Operating The Air Cooler - Inventum VLK401WA Mode D'emploi

3

prior to first use

Follow these instructions when using the appliance for the first time: Carefully unpack the air cooler and all accessories
and remove all packaging material and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation.
Check that all mentioned accessories have been supplied.
Clean the air cooler with a slightly damp cloth.
Prior to connecting the appliance, check that:
• the connection voltage corresponds with what is stated on the information plate;
• the socket and cord are suitable for the appliance;
• the plug of the cord fits in the socket;
• the appliance is placed on a stable and flat surface.
A mobile air cooler must be placed on a flat surface with sufficient room all around. Do not block the air inlets and outlets
and ensure a free space of minimum 30 cm around the appliance.
Fill the supplied cooling elements with water once. Close the cooling elements. The water in the cooling elements never
needs to be replaced. Place the cooling elements in the freezer until they are completely frozen.
Caution: the water in the cooling elements is not suitable for consumption. Only use the cooling elements in the air cooler.
The cooling elements are not suitable for use as water bottles or other similar purposes.
4

operating the air cooler

In addition to cooling, the air cooler has two other modes, i.e. ventilation and air humidification.
The air cooler can be operated via the control panel on the appliance and with the provided remote control.
• Choose a location near a socket.
• Insert the plug in a socket.
• The appliance gives a short beep sound.
• The indicator light lights up and the appliance is standby.
indicator lights
VENTILATION
The ventilation position can be set to different speeds.
• Switch on the appliance using the ON/OFF key.
• The indicator light for the lowest speed
• Change the ventilation speed with each press on the button SPEED: low, medium or high.
COOLING
The appliance is able to cool the air flow by adding cold water in the water tank. Create additional cool air by placing a frozen
cooling element in the water in the water tank. The appliance is supplied with two cooling elements, so you can use them
alternately and the appliance is able to cool continuously.
Caution: only use this mode when the water tank is provided with fresh cold water.
14
• English
cooler/humidify
lights up.
swing speed
timer on/ off