Publicité
Les langues disponibles
Les langues disponibles
3
Description
3.1
Product overview
3.2
Intended use
The product described is a hand-held cordless cut-out tool. It is designed for making cut-outs in drywall
board, gypsum fiber board, composite materials and wood or wood-like materials.
The product comes with a removable vacuum cleaner hose connector for common vacuum-cleaner hoses.
The connector fits on to the product, enabling it to be connected to a vacuum cleaner.
▶ Use only Hilti Liion batteries of the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3
Items supplied
Cut-out tool, depth gauge, three collets (1/8", 5/32", 1/4"), clamping nut, vacuum cleaner hose connector,
hex wrench, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4
Safety devices
This product has a motor protection system. It monitors current consumption and motor temperature and
prevents the product from overheating.
If the motor is overloaded through application of excessive working pressure, the product's performance
drops noticeably or it might stall completely.
If the power tool stalls or slows significantly due to overloading, release the pressure applied to the product
and then allow it to run under no load for approx. 30 seconds.
6
English
1
Vacuum cleaner hose connector
@
LED lights
;
Depth gauge
=
Securing screw
%
On/off switch
&
Switch-on interlock
(
Accessory tool
)
Collet
+
Clamping nut
§
Insulated grip surface
/
Spindle lockbutton
:
Insulated grip surface
∙
Air vents
$
Release button with additional function
£
(charge state display activation)
Battery
|
2143544
*2143544*
Publicité
