Publicité
Les langues disponibles
Les langues disponibles
V1.0
13. If devices are used for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of a dust collection system reduces
dust-related hazards.
AIR TOOL PRECAUTIONS
1.
Extended exposure to air tool noise may cause hearing
loss. Ear protection gear can reduce or eliminate the
noise level.
2.
Inspect the tool's air line for cracks, fraying or other faults
before each use. Discontinue use if the air line is damaged
or hissing is heard from the air line or connectors, while
operating the tool. Replace the defective component/
air line.
3.
Do not allow people, mobile equipment or vehicles to
pass over the unprotected air line. Position the air line
away from high traffic areas, in a reinforced conduit or
place planks on both sides of the airline to create a
protective trench.
4. Prevent damage to the air line by observing the following:
a.
Never carry the tool by the air line.
b.
Keep the air line behind the tool and out of the tool's
work path.
c.
Keep the air line away from heat, oil, sharp edges or
moving parts.
d. Do not wrap the air line around the tool as sharp
edges may pierce or crack the airline. Coil the air
line when storing.
5.
A damaged or disconnected air line under pressure may
whip around and inflict personal injury or damage the work
area. Secure the compressor's air line to a fixed or
permanent structure with clamps or cable ties.
Visit www.princessauto.com for more information
1/2 in. dr. Micro Stubby Air Impact Wrench
8630972
7
Publicité
