Tekmar tekmarNet 2 Guide D'installation Rapide page 3

6. Close Thermostat
7. User Interface
8. Critical Settings
The following settings are essential to the successful operation of the system.
Important Note: Set switch setting #3 and tekmarNet
Access level to Installer. Return to Lock setting once installation has been completed.
Press
+
Together
A Watts Water Technologies Company
pivot
tab
• Press and hold down both the
to change from one step to the next.
• Release both buttons once the step has been reached.
• Press the
available.
• Press and hold down both the
seconds to go to the next step, OR
• After 10 seconds of no button activity, the display goes
back to normal operation.
® system control to Unlock to change
or the button to change the setting, if
3
and buttons for 2 seconds
and buttons for 2
© 2014 528_Q - 02/14