KSIX OMNILAMP Manuel D'instructions page 2

Pairing
1. Turn on the speaker to be ready for pairing. After 2-3 seconds, you would hear a
chimed Bluetooth sound.
2. Activate the Bluetooth function on your mobile phone or any Bluetooth devices,
search and select "BXCQILAMP02" and start pairing.
3. The Bluetooth sound will chime again once paired.
Note:
1. Keep the range of 1 meter when pairing. If pairing was not successful, turn off the
speaker and re-pair again.
2. Once paired, the devices will remember each other unless pairing information is
deleted.
3. To pair with a new device, follow steps 1-3 above after disconnecting from exis-
ting device
Wireless Charge
Place your device on the top circle to start wireless charging.
TWS (True Wireless Stereo) Function: to pair one mobile phone with 2 speakers
together
1. Turn on both speakers together, then quickly double click "Power" buttons of both
speakers and they will pair with each other first.
2. Wait for around 5-10 seconds until the speakers "beep" once in sequence, mea-
ning they are both paired.
3. Activate Bluetooth function of your device and pair with "BXCQILAMP02".
Note:
If you want to disconnect existing TWS connection, double click "Power" button of
either speaker, the sub-speaker will disconnect, the host speaker will keep playing.
Control Ambient lighting by touch button
Dimmer: Short press to adjust the brightness from 100%/50%/25%/OFF.
Change color: Long press to switch colors (7 colors to choose from)
Operation by remote control
NOTE: Please remove the plastic tab from the battery cover before use.
1. Standby button: Short press to turn off the light and Bluetooth. Short press
again to turn them on.
2. Brightness intensity
3. Light ON/OFF button
4. Bluetooth function: switches into Bluetooth mode.
5. Color selection buttons
6. Color selection button (7 colors to choose from).
7. Music flash button: The light will flash when the music is playing
FLASH
8. Smooth button: colors will change automatically.
SMOOTH
9. White color button
W
10. Previous track button
11. Next track button
12. Pause and play
13. Volume- and +
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
z• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.