Publicité
Les langues disponibles
Les langues disponibles
Important Information
Motorized T.V. Lift Stand (37" - 65")
Item No. 2197502
Intended use
The product is intended to be used as a motorized
TV/monitor lift stand together with a custom-built
or prefabricated enclosure. It is powered by the
included adapter and operated using the remote
control.
It is intended for indoor use only. Do not use it
outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
If operating the mount continually, to prevent
overheating limit usage to: max. 2 minutes on / 18
or more minutes off.
For safety and approval purposes, you must not
rebuild and/or modify this product. If you use the
product for purposes other than those described
above, the product may be damaged. In addition,
improper use can result in short circuits, fires, electric
shocks or other hazards. Read the instructions
carefully and store them in a safe place. Make this
product available to third parties only together with
its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Up-to-date operating instructions
Download the latest operating
instructions at www.conrad.com/
downloads or scan the QR code
shown. Follow the instructions on
the website.
Safety instructions
Read the operating instructions
and the information contained here
carefully, and especially observe
the safety information. If you do
not
follow the safety instructions
and safety information on proper
handling, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General information
•
The device is not a toy. Keep it out of the reach
of children and pets.
•
Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
•
Protect
the
appliance
from
temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and
solvents.
•
Do not place the product under any mechanical
stress.
•
If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
•
Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
•
Consult an expert when in doubt about the
operation, safety or connection of the appliance.
•
Maintenance, modifications and repairs must
only be completed by a technician or an
authorised repair centre.
•
If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected devices
•
Also observe the safety and operating
instructions of any other devices which are
connected to the product.
c) (Rechargeable) batteries
•
Correct polarity must be observed while inserting
the (rechargeable) battery.
•
The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
•
(Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
•
All
(rechargeable)
batteries
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
•
(Rechargeable)
batteries
dismantled, short-circuited or thrown into fire.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
d) Electrical
•
Never pour any liquids over electrical devices
or put objects filled with liquid right next to the
device. If liquid or an object does enter the
interior of the device, power down the respective
socket (e.g. switch off the circuit breaker) and
then unplug the mains plug from the mains
socket. Discontinue use and take the product to
a specialist workshop.
•
The mains outlet must be located near to the
device and be easily accessible.
•
As power supply, only use the supplied mains
adaptor.
•
Only connect the power adaptor to a normal
mains socket connected to the public supply.
Before plugging in the power adaptor, check
whether the voltage stated on the power adaptor
complies with the voltage of your electricity
supplier.
•
Never connect or disconnect power adaptors if
your hands are wet.
•
Never unplug the power adaptor from the mains
socket by pulling on the cable; always use the
grips on the plug.
•
When setting up the product, make sure that
the cable is not pinched, kinked or damaged by
sharp edges.
•
Always lay the cables so that nobody can trip
over or become entangled in them. This poses
extreme
a risk of injury.
•
For safety reasons, disconnect the power
adaptor from the mains socket during storms.
e) Persons and Product
•
Mounting the product in an unsuitable location
can result in injury or damage to property!
•
Proceed with care when assembling and
mounting the product! The product has some
sharp edges which have the potential to cause
injury!
•
Only carry out the work necessary to mount (or
adjust) the mount. Never attempt to dismantle,
convert or repair the product. Some TV/monitor
mounts contain pre-stressed metal springs.
These may cause serious injury if you attempt to
dismantle the mount improperly.
•
Do not hold onto the mount or use it to support
yourself.
•
Do not secure any objects to the mount other
than a TV or monitor.
•
Lay all monitor cables such that they will not be
squeezed or bent in the mount.
•
Do not use any force when moving/adjusting
the mount, otherwise you may damage your TV/
monitor.
•
Do not apply pressure to the TV/monitor screen
when moving/adjusting the mount!
•
Do not overload the mount. Pay attention to the
maximum monitor size/weight provided by the
manufacturer.
•
Do not hold onto the mount or use it to support
yourself.
•
Do not secure any objects to the mount other
than your TV/monitor.
•
In order to avoid collision and wire pulls, keep
the control box and all cables away from the lift.
•
Please prepare a proper cabinet before
installation.
f) Miscellaneous
•
The screws that you will need to mount the
product and your TV/monitor are included, but
other screws may be required depending on your
TV/monitor specifications.
•
Do not use any force when tightening screws,
otherwise you may damage your TV/monitor and
void the warranty! If you are in any doubt about
the correct length of the screws required, contact
a technician.
Care and cleaning
should
be
•
The product is essentially maintenance-free.
Check that all of the screws are securely in
place from time to time (approximately every 3
months). The screws may become loose over
time due to you adjusting and moving the screen/
must
not
be
mount.
•
Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
•
Always disconnect the mount and the connected
monitor from the mains before cleaning the
product.
•
Use a dry, lint-free cloth to clean the product.
Technical data
a) General
Power consumption .............................. max. 100 W
Standby power consumption ................ 0.13 W
Load...................................................... max. 50 kg
VESA .................................................... 200 x 200, 300 x 300, 400 x 200, 400 x 400, 600 x 400
Diagonal screen size ............................ 94 - 165 cm (37 - 65 inches)
Operating/Storage conditions ............... -5 to +40 ºC, 20 – 80 % RH (non-condensing)
Dimensions (L x W x H) ........................ 215 x 660 x 700 - 1910 mm
Weight .................................................. 17 kg (without accessories)
b) Power adaptor
Input voltage / current ........................... 100 - 240 V/AC, 50/60 Hz, max.1.5 A
Output voltage / current ........................ 29 V/DC, 1.8 A
Cable length ......................................... 1.2 m
c) DC adaptor to stand
Input voltage / current ........................... 29 V/DC, 1.8 A
Duty cycle ............................................. 10 %, max. 2 min on / 18 mins off
Cable length ......................................... 8.5 cm
d) Remote control
Power supply ........................................ 2 x 1.5 V AAA batteries (not included)
Transmission frequency........................ 2.437 GHz
Transmission power.............................. < 2 dBm
Transmission distance .......................... max. 10 m (open area)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1,
D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
Click on the following link to read the full
text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol
and enter the product order number in the search
box. You can then download the EU declaration of
conformity in PDF format.
Disposal
a) Product
Electronic
devices
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable)
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium, Hg
= Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulfill your statutory obligations and
contribute to the protection of the environment.
17.5 kg (with accessories)
*2197502_v1_0320_02_dh_ss_en
are
recyclable
batteries.
Disposing
Publicité
