Ferroli CRP ZONE Manuel De L'utilisateur page 84

8.6 Radio signal strength
It is possible to have an indication of the strength of the
radio signal received from the gateway. this information
is useful both in the installation phase and in checking
correct installation with the gateway.
to get this information it is necessary to keep the button
pressed for more than 5 seconds. On releasing it,
the symbol rss appears with an indication of the signal
strength ("fig. 33").
the screen remains for about 80 seconds and the value
is updated every 15 seconds.
the indication, with a resolution of 0.1, is an index of
the goodness of the radio communication between the
thermostat and gateway, as given in the following table.
To finish and exit the screen before the 80 seconds, just
press the button .
Display information
18.0 ÷ 24.0
16.0 ÷ 17.9
15.5 ÷ 15.9
0.0 ÷ 15.4
84
EN
RF signal strength
Excellent
Good
Sufficient
Insufficient (It is advisable to change position)
cod. 3542B150 - Rev 02 - 04/2022
fig. 33