Ferroli CRP ZONE Manuel De L'utilisateur page 73

12. "PaIRINg" appears.
13. Confirm with the button
From CRP ZONE:
14. Press the button b on the thermostat for 1 - 2 sec-
onds using a pointed object ("fig. 23").
15. During the RF pairing phase "PAI" appears on the
thermostat display with "rF" blinking.
16. If the pairing ends successfully, the icon
up steady.
17. If the procedure ends with an error, the thermostat
automatically does a factory reset, identified by rtF,
with rF blinking. wait for the ReSet operation to
finish, then repeat the procedure.
.
lights
cod. 3542B150 - Rev 02 - 04/2022
R F D E V I C E
P A I R I N G
I N S T A L L E R
fig. 22
B
fig. 23
73
EN