Publicité
Les langues disponibles
Les langues disponibles
HOW TO INSTALL YOUR SOLAR WEDGE LIGHT
The Solar Wedge Light can be mounted vertically or horizontally onto a solid surface
using the supplied mounting bracket, wood/sheet metal screws, and anchors.
If you are placing the light on a flat surface, mounting is not required. Remember it is
best to face the panel south for direct sunlight exposure.
The included mounting bracket and screws can be used to mount the Solar Wedge Light
securely to a wall or other stable surface.
To install the mounting bracket with screws:
1. Remove the mounting bracket from the bottom of the Solar Wedge Light by inserting
the key into the keyhole and twisting the key counter-clockwise to the OPEN
position.
2. If you are mounting the bracket on a very hard surface, you may need to drill holes
for the screws first. The included screw anchors can be used for drywall, cement,
brick, or similar surfaces.
3. Align the mounting bracket and install the two screws using a Phillips screwdriver.
4. Place the Solar Wedge Light onto the mounting bracket.
5. Insert the key into the keyhole and twist the key clockwise to the LOCK position.
6. Remove the key and gently nudge the Solar Wedge Light to make sure that it is
securely mounted.
3
Publicité
