Matco Tools BCW20 Guide Rapide

WARNING
Study, understand and follow all instructions provided with
this product. Read these instructions carefully before
installing, operating, servicing or repairing this tool. Keep
these instructions in a safe accessible place.
INTENDED USE OF THE TOOL
This item is used to simplify the changing of front or rear
back pads. It is also helpful in replacing caliper brake
pistons. Do not use this tool outside of the designed intent.
Never modify the tool for any other purpose or use.
WARNING
Caution: To help prevent personal injury
• Normal use of this product is likely to expose the user
to dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using
this product. Study, understand and follow all instructions
provided with this product. Failure to read and follow
all warnings and operating instructions may result in
damages and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is
in secure position, and will not move during repair.
MODEL:
BCW20
20 PIECE
BRAKE CALIPER
TOOL KIT
MADE IN CHINA
Page 1
Product Type:
20 PIECE BRAKE CALIPER
TOOL KIT
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user
against defective material or workmanship for a period of 1 year
from the date of purchase.
The manufacturer reserves the right to determine whether the
part or parts failed because of defective material, workmanship
or other causes.
Failures caused by accident, alteration, or misuse are not
covered by this warranty.
The manufacturer, at its discretion, will repair or replace products
covered under this warranty free of charge. Repairs or
replacements of products covered under this warranty are
warrantied for the remainder of the original warranty period.
The manufacturer or its authorized service representatives must
perform all warranty repairs. Any repair to the product by
unauthorized service representatives voids this warranty. The
rights under this warranty are limited to the original user and
may not be transferred to subsequent owners.
This warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness for a
particular purpose. Some states do not allow the exclusion or
limitations of incidental or consequential damages, so the above
limitations may not apply to you.
Important
Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these
instructions in a safe, accessible place.
Unpacking
When unpacking, check the parts diagram and part
number listing on page 5 to make sure all parts are
included. If any parts are missing or damaged,
please call your distributor.
PRODUCT INFORMATION:
• More applications. 20 piece master kit features two
new 3-pin adapters to include new Audi, BMW, VW,
Volvo, Renault and Citroen applications.
• Durable construction. Includes both left-handed and
right-handed thrust bolt assemblies machined from one
piece for increased lifetime.
• Essential. Needed to perform rear disc brake service
and pad replacement on most modern vehicles.
DO NOT DISCARD – GIVE TO USER
1711450-14