Ghost CASPER Manuel page 18

Autx - Selection of automatic mode and program scrolling speed
Press the MENU button until AUTX is displayed. Press ENTER.
The display shows «AUT0» to «AUT3». Select the desired program with the UP & DOWN keys. Press ENTER
to validate the selection, then set the desired scrolling speed between
«SP00» (slowest) and «SP99» (fastest) with the UP & DOWN keys, Press ENTER to validate the selection.
SOUX - Selection of audio mode and microphone sensitivity
Press the MENU button until SOUX is displayed. Press ENTER.
The display shows «SOU0» to «SOU3». Select the desired program with the UP & DOWN keys. Press ENTER
to validate the selection, then set the desired microphone sensitivity between
«SU00» (the less sensitive) and «SU99» (the most sensitive) with the UP & DOWN keys, Press ENTER to
validate the selection.
rSet - projector reset
Press MENU, select RESET and press ENTER to confirm your choice then keep the key pressed for 3 se-
conds to confirm the projector reset.
Page 18