Telestar DIGINOVA 23 CI+ Guide D'installation Rapide page 7

Installation
After connecting the receiver and turning on the TV, turn
on the receiver by pressing the red POWER button on the
remote control.
On first use, the menu will be automatically displayed.
Installation
Select the desired language from the first screen.
> Use the arrow keys to select the desired language and
confirm your choice using the OK button
> Select the country with the arrow keys and confirm the
selection using the OK button
> Select the type of connection. By default, the satellite
connection and the terrestrial digital connection are
active. Confirm the selection using the OK button.
> Check the default settings on the next page, modify them by pressing the YELLOW button and then the arrow
keys, and confirm your selection with the GREEN button.
> Use the arrow keys to select the digital terrestrial antenna input (enable or disable) and confirm the selection with
the GREEN button
> Select a predefined channel list or continue with an automatic channel search with the arrow keys and confirm
with the GREEN key.
The receiver will now automatically scan for all available TV and radio channels and automatically save them. Upon
completion of the scan and saving of the channels, confirm with the GREEN key. The receiver will automatically
switch to the first stored channel.
Change from TV mode to Radio and vice versa
Press the TV/Radio button to change the playback mode.
Please note that radio programs may not be available in all countries via digital terrestrial DVB-T/T2 and/or DVB-
S/S2.
EN
7