Megger PSI410 Manuel De L'utilisateur page 5

SPECIFICATIONS
Rotation display:
Phase connection status indication:
Audible rotation tone:
Maximum voltage (phase to phase):
Frequency:
Phase colour coding:
Power supply:
Operating ambient:
Storage temperature:
Safety:
Ingress Protection:
Safety rating of croc clips and prods:
Dimensions (W x H x D): 78 mm x 137 mm x 31 mm
Test lead length:
Test lead fuse rating:
Weight:
Usage:
3 x red / green LEDs
3 x red / green LEDs
Phase present indication = 195 to 265 V
Clockwise rotation = continuous tone
Counter clockwise = warble tone
(0.4 s on / 0.4 s off)
500 V
50 Hz +/- 1 %
L1 (Brown / Red) L2 (Black / Yellow)
L3 ( Grey / Blue)
Power drawn from a minimum of two phases
connected in any position
5 ° - 40 °C < 80 % RH
0 - 40 °C
The instrument complies with IEC61010-1:2010
CATIV 600 V
IP 54
CAT IV 600 V
830 mm
SIBA 10 A 600 V
850g
The PSI410 is suitable for intermittent tests only
and should not be used for continuous monitoring
of phase rotation
5