Publicité
Les langues disponibles
Les langues disponibles
Konformitätserklärung
Wir, die Trotec GmbH, erklären in alleiniger Verantwortung, dass das
nachfolgend bezeichnete Produkt entwickelt, konstruiert und gefertigt wurde
in Übereinstimmung mit den Anforderungen der EU-Richtlinie Funkanlagen
i.d.F. 2014/53/EU.
Produktmodell/Produkt:
Produkttyp:
Baujahr ab:
Einschlägige EU-Richtlinien:
•
2011/65/EU: 01.07.2011
•
2014/30/EU: 29.03.2014
•
2015/863/EU: 31.03.2015
Angewandte harmonisierte Normen:
•
EN 61326-1:2013
Angewandte nationale Normen und technische Spezifikationen:
•
EN 300 328 V2.1.1:2016-11
•
EN 301 489-1 Draft Version 2.2.0:2017-03
•
EN 301 489-17 Draft Version 3.2.0:2017-03
•
EN 61010-1:2010
•
EN 62479:2010
•
IEC 62321-3-1:2013
•
IEC 62321-6:2015
•
IEC 62321-7-1:2015
•
IEC 62321-7-2:2017
•
IEC 62321-8:2017
Hersteller und Name des Bevollmächtigten der technischen Unterlagen:
Trotec GmbH
Grebbener Straße 7, D-52525 Heinsberg
Telefon: +49 2452 962-400
E-Mail: info@trotec.de
Ort und Datum der Ausstellung:
Heinsberg, den
01.07.2019
Detlef von der Lieck, Geschäftsführer
4
BM22WP
Materialfeuchtemessgerät mit
Smartphone-Bedienung
2019
Materialfeuchtemessgerät mit Smartphone-Bedienung BM22WP
English
en
Safety
Read this manual carefully before starting or using the device. Always
store the manual in the immediate vicinity of the device or its site of use.
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
•
Do not use the device in potentially explosive rooms or areas and do not
install it there.
•
Do not use the device in aggressive atmosphere.
•
Do not immerse the device in water. Do not allow liquids to penetrate
into the device.
•
The device may only be used in dry surroundings and must not be used
in the rain or at a relative humidity exceeding the operating conditions.
•
Protect the device from permanent direct sunlight.
•
Do not expose the device to strong vibrations.
•
Do not remove any safety signs, stickers or labels from the device. Keep
all safety signs, stickers and labels in legible condition.
•
Do not open the device.
•
Observe the storage and operating conditions (see Technical data).
Intended use
Use this device in combination with a terminal device that is compatible with
the installed Trotec MultiMeasure Mobile app.
Only use the device for moisture measurements of wood and building
materials within the measuring range specified in the technical data.
The Trotec MultiMeasure Mobile app on the terminal device is used for both
operation and the evaluation of the measured values.
Data logged by the device can be displayed, saved or transmitted either
numerically or in form of a chart.
To use the device for its intended use, only use accessories and spare parts
which have been approved by Trotec.
Foreseeable misuse
Do not use the device in potentially explosive atmospheres, for measurements
in liquids or on live parts.
Radio waves may interfere with the operation of medical equipment and cause
malfunctions. Do not use the device near medical equipment or within medical
institutions.
Persons with pacemakers must observe a minimum distance of 20 cm
between the pacemaker and the device.
Also do not use the device near automatically controlled systems such as
alarm systems and automatic doors. Radio waves may interfere with the
operation of such equipment and cause malfunctions. Make sure that no other
devices are malfunctioning during the use of your device.
Any unauthorised changes, modifications or alterations to the device are
forbidden.
EN
Publicité
